Xbox Backup Creator Back Up Xbox and Xbox 360 Games

This article will guide readers through an alternative method for backing up Xbox and Xbox 360 games using an original Xbox 360 DVD drive and 0800 firmware.

This method allows users to back up games that cannot be installed to the Xbox 360 hard drive or USB drive, and burn them as proper ISOs for use on an X-key or to be burned to a disk, as well as emulation.

The guide assumes that the DVD drive used is not intended for use in an original console again, and covers the flashing process to get an 0800 drive, as well as the backup procedures.

To get started, readers will need an Xbox 360 DVD drive and the light on DG-16D2S, BenQ VAD6038, or Philips VAD6038 models. Additionally, an Executor Xbox 360 USB Pro V2 is required.

The software needed includes Jungle Flasher, Xbox and Xbox 360 dumping kit, and ABG X360 for verification purposes.

After setting up the software, readers will need to restart their computer with enforced driver signatures turned off, install Xbox 360 USB Pro V2 drivers, and hook up the Xbox 360 USB Pro to the computer and the 360 DVD drive to get the 0800 firmware flashed.

Alternative Method for Backing Up Xbox Games

To back up Xbox and Xbox 360 games, an 0800 flash to DVD drive can be used as an alternative method. This method allows games that cannot be installed on the Xbox 360 hard drive or USB drive to be backed up as a proper ISO. The games can then be used on something like an x-key or burned to a disk as well as emulation. This method also works with original Xbox games.

To get started with this process, an Xbox 360 DVD drive is needed, and it needs to be the following drive models: light on DG-16D2S BenQ VAD6038, or Philips VA d6038. These types of drives can be found on places like eBay for a wide variety of price points.

The next thing you need is an Executor Xbox 360 USB Pro V2. The one they’re using in the video is the 360 USB Pro V2. But, these can be a bit costly nowadays, so just keep that in mind.

You also need some software. You’ll need Jungle Flasher, Xbox and Xbox 360 dumping kit from the Redump site, and ABG X360. ABG X360 is a tool to check if our game copies are good.

To make the software ready, first run the ABG X360 setup tool. Then, get the Xbox 360 dumping kit and Jungle Flasher. Restart your computer without enforced driver signatures so the Xbox 360 USB Pro V2 drivers can be installed.

After installing the drivers, hook up the Xbox 360 USB Pro to the computer hook the 360 DVD drive up to it and get the 0800 firmware flashed. Launch Jungle Flasher and checkmark the box on the MTK flash 32 page to activate the Xbox 360 USB Pro.

For the light on, select the light on erase option turn the power off to the drive and turn it back on to access vendor mode. The status update should show that the drive is now in vendor mode.

Required Hardware

To back up Xbox and Xbox 360 games using an 0800 flash to DVD drive, the following hardware is required:

• Xbox 360 DVD drive (models: light on DG-16D2S BenQ VAD6038, or Philips VA d6038)

• Executor Xbox 360 USB Pro V2

These items can be found on websites such as eBay, but it is important to find price options. For instance, the DVD drive can be purchased for as low as $25.

Note that the DVD drive used for this process should not be one that the user plans to use in an original console again. The process involves flashing the drive with 0800 firmware and backing up the games, which makes it unsuitable for use in a standard 360 console.

With the required hardware in hand, the user can proceed to the software setup process.

Required Software

To back up Xbox and Xbox 360 games using an 0800 flash to DVD drive, some specific software is required. The following software is necessary for this process:

• Jungle Flasher: This app can be downloaded from the Redump Wiki page. It is used to flash the Xbox 360 DVD drive.

• Xbox and Xbox 360 dumping kit: This kit is available on the Redump site and is used to extract the game data from the DVD drive.

• ABG X360: This is a verification tool that ensures the disk dumps are good. Version 1.07 can be downloaded from Hadds.

It’s really important to know that the Xbox 360 DVD drive should be one of these types: light on DG-16D2S BenQ VAD6038, or Philips VA d6038. You can find these drives on eBay for different prices, so try to find one that’s not too expensive. You also need an Executor Xbox 360 USB Pro V2 for this, and you can find it on eBay too.

Once you have the software, first run the ABG X360 setup tool and get the Xbox 360 dumping kit and Jungle Flasher. Then, restart your computer without enforced driver signatures to put in the Xbox 360 USB Pro V2 drivers. After that, open the Jungle Flasher folder and install the drivers to flash the Xbox 360 USB Pro V2.

When the Xbox 360 USB Pro is connected to the computer and the 360 DVD drive is attached to it, open Jungle Flasher. Choose the 0800 firmware for the exact drive you have, and tick the USB-only box on the MTK Flash 32 page to use the Xbox 360 USB Pro. Pick the light on erase option for the light on the drive, turn off the power and quickly turn it back on to enter vendor mode. Lastly, use Jungle Flasher to put the firmware onto the drive.

Software Setup

To back up Xbox and Xbox 360 games using an 0800 flash to DVD drive, the first step is to gather the necessary hardware and software. The hardware required includes an Xbox 360 DVD drive, specifically the Light On DG-16D2S BenQ VAD6038, or Philips VA D6038 models, and an Executor Xbox 360 USB Pro V2.

Moving onto software, the following programs are needed: Jungle Flasher, Xbox and Xbox 360 dumping kit, and ABG X360. Jungle Flasher can be downloaded from the Redump Wiki page, while the Xbox and Xbox 360 dumping kit can be downloaded from a Mega download link on the same site. Finally, ABG X360 version 1.07 can be downloaded from Hadds.

Once all the necessary software is downloaded, the ABG X360 setup tool should be run, and the Xbox 360 dumping kit and Jungle Flasher should be extracted. The computer should then be restarted with enforced driver signatures turned off.

After restarting, the Jungle Flasher folder should be opened, and the Xbox 360 USB Pro V2 drivers should be installed. The Molex to SATA power adapter can then be connected to the Xbox 360 USB Pro, and the Xbox 360 DVD drive can be connected to it.

Once everything is connected, Jungle Flasher should be launched, and the 0800 firmware for the specific DVD drive being used should be selected. For the Light On model, the Light On erase option should be selected.

Following the instructions given by Jungle Flasher, the power to the DVD drive should be turned off and then quickly turned back on to access vendor mode. The status will then update, and the firmware will be flashed to the DVD drive.

With the firmware successfully flashed, the DVD drive can now be used to back up Xbox and Xbox 360 games.

Installing Xbox 360 USB Pro V2 Drivers

To begin the process of backing up Xbox and Xbox 360 games using an 0800 flash to DVD drive, the user needs to install Xbox 360 USB Pro V2 drivers. The following steps outline how to install the drivers:

• Download Jungle Flasher from the Redump Wiki page or the direct link provided.
• Download the Xbox and Xbox 360 dumping kit from the Redump site.
• Download ABG X360 version 1.07 from Hadds.
• Run the ABG X360 setup tool and extract the Xbox 360 dumping kit and Jungle Flasher.
• Restart the computer with enforced driver signatures turned off.
• Open the Jungle Flash folder and go inside to see the drivers for flashing. Find the ones that end in INF, such as X360 USB_Pro.INF and CK3i USB.INF.
• Right-click on each INF file and select “install.”
• Hook up the Xbox 360 USB Pro to the computer and the Xbox 360 DVD drive to it.
• Launch Jungle Flasher from the Jungle Flasher folder.
• Click “Yes” to load the security prompt.
• Click “Yes” to the script prompt.
• Click “Open Target Firmware” and navigate to the Jungle Flasher folder to select the 0800 firmware for BenQ and Fat Light on V3.
• Checkmark the “USB only” box on the MTK Flash 32 page to activate the Xbox 360 USB Pro.
• Select the “light on erase” option for the light on the DVD drive.
• Turn the power off to the drive and turn it back on to access vendor mode.
• Click “Yes” on the prompt and wait for the status update to show “Vendor Mode.”
• Click “Write” to flash the 0800 firmware.

By following these steps, the user can successfully install Xbox 360 USB Pro V2 drivers and begin the process of backing up Xbox and Xbox 360 games.

Flashing Process

To back up Xbox and Xbox 360 games using an original Xbox 360 DVD drive and 0800 firmware, one needs to follow a flashing process. This process involves obtaining an Xbox 360 DVD drive of a specific model, such as the light on DG-16D2S BenQ VAD6038, or Philips VA d6038. The next step is to acquire an Executor Xbox 360 USB Pro V2.

via GIPHY

The software requirements for this process include Jungle Flasher, Xbox and Xbox 360 dumping kit, and ABG X360. These can be downloaded from the Redump Wiki page and Hadds. After downloading the software, one needs to set it up by running the ABG X360 setup tool and extracting the Xbox 360 dumping kit and Jungle Flasher.

To begin the flashing process, one needs to restart the computer with enforced driver signatures turned off. This allows for the installation of Xbox 360 USB Pro V2 drivers. After disabling driver signature enforcement, one can install the drivers and hook up the Xbox 360 USB Pro to the computer and DVD drive.

Once everything is hooked up, one can launch Jungle Flasher from the Jungle Flasher folder. After selecting the 0800 firmware for their specific DVD drive model, one can checkmark the USB-only box on the MTK Flash 32 page. For the light-on model, one can select the light-on erase option follow the instructions to turn it off and quickly turn on the power to the drive to access vendor mode.

Using Xbox Backup Creator

To back up Xbox and Xbox 360 games, the user needs an 0800 flash to DVD drive. This method allows them to back up games that couldn’t be installed onto the Xbox 360 hard drive or USB drive. Instead, they can be burned as a proper ISO and used on something like an X-key or burned to a disk as well as emulation. This method also works with original Xbox games.

The guide assumes that the disk drive that the user wants to use for this is one they don’t care about using in an original console again. The flashing process to get the no 800 drive and the backup procedures are both covered in this guide.

To get started with this process, the user needs an Xbox 360 DVD drive. The following drive models are compatible: light on DG-16D2S, BenQ VAD6038, or Philips VA d6038. The user can find these types of drives separately on places like eBay for a variety of price points.
The user also needs an Executor Xbox 360 USB Pro V2. This guide covers the process using the 360 USB Pro V2.

The user needs to download several software tools to complete the process. Jungle Flasher, Xbox and Xbox 360 dumping kit, and ABG X360 are the required software tools.
The user needs to set up the software tools. They must restart their computer with enforced driver signatures turned off. They also need to extract their Xbox 360 dumping kit and jungle flasher.

Once you have the software tools ready, you can connect your Xbox 360 USB Pro to your computer and attach your 360 DVD drive to it to put in the 0800 firmware. Open Jungle Flasher and choose the 0800 firmware for your exact drive.

But remember, when you flash your DVD drive, you need to be careful. If you don’t back up your DVD drive key before doing this, your drive won’t work in a regular 360 anymore. You would have to do a reset glitch hack or find the drive key again.